SNAPSHOT® PRO PREMIUM TUNGSTEN CARBIDE CUE STICK FERRULE

• Popularity - 7365 views, 1052.1 views per day, 7 days on eBay. Super high amount of views. 23 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Snapshot® Pro<br>Premium Tungsten Carbide Cue Stick Ferrules<br>The World's Best Ferrule<br>Shown with Navigator Japan Ultra Premium Hand Made Tips available in our other listings<br>These exciting new<br>Snapshot® Pro<br>Ferrules are made with a new lightweight formula but they have the same physical properties as our original<br>Snapshot®<br>Ferrule.  And they are available in the same Outside Diameters as our original<br>Snapshot®<br>.  However, what makes the<br>Snapshot® Pro<br>Ferrule different is that it has a thinner wall and it is available in 4 different lengths:  8.00 mm, 12.7 mm (1/2 inch), 19.05 mm (3/4 inch), and 25.4 mm(1 inch).<br>They weigh approximately:<br>8 mm long Snooker sizes -  9.00 mm OD,  9.50 mm OD, 10.00 mm OD, 10.50 mm OD - 2 grams (.071 oz) to 2.5 grams (.088 oz)<br>1/2 inch long - 3.5 grams (.13 oz.)<br>3/4 inch long - 6 grams (.212 oz.)<br>1 inch long - 8 grams (.282 oz.)<br>Snapshot® Pro<br>incorporates state-of-the-art high-tech metal technology.  These ferrules are not just cut from a piece of tubing.  A mold is made for each size and each one of these ferrules is manufactured individually.  They are die cast under extremely high heat, diamond polished to a mirror finish and Laser Etched.<br>Manufactured under strict tolerances and cutting edge metal technology these ferrules will resist scratching and will not break or discolor under harsh playing conditions.<br>If you are looking for the best ferrule money can buy this is it.  Please buy one and give it a try.  You will not be disappointed.<br>What are the advantages of Snapshot® Ferrules?<br>They are extremely scratch resistant.<br>Chalk is very abrasive but won't scratch Snapshot® Ferrules.  Even 150 grit sandpaper won't scratch them.<br>They won't rust or oxidize.<br>Snapshot® Ferrules contain no iron or steel that can rust.<br>They will not discolor or peel.<br>Snapshot® Ferrules are not plated.  Each one is die cast under extremely high heat and strict tolerances in a state-of-the-art facility.<br>They will not shrink or expand.<br>Snapshot® Ferrules are extremely hard and will not shrink or expand.<br>They will not crack even under harsh playing conditions.<br>Snapshot® Ferrules have been tested by real pool players and have been thoroughly tested.<br>They are available in 10 OD sizes and 4 lengths:<br>9.00 mm OD x 7.00 mm ID x 8.00 mm long<br>9.50 mm OD x 7.50 mm ID x 8.00 mm long<br>10.00 mm OD x 8.00 mm ID x 8.00 mm long<br>10.50 mm OD x 8.50 mm ID x 8.00 mm long<br>11.75 mm OD x  9.75 mm ID in these lengths - 12.70 (1/2"), 19.05 (3/4") or 25.4 (1 ")<br>12.00 mm OD x 10.00 mm ID in these lengths - 12.70 (1/2"), 19.05 (3/4") or 25.4 (1 ")<br>12.25 mm OD x 10.25 mm ID in these lengths - 12.70 (1/2"), 19.05 (3/4") or 25.4 (1 ")<br>12.50 mm OD x 10.50 mm ID in these lengths - 12.70 (1/2"), 19.05 (3/4") or 25.4 (1 ")<br>12.75 mm OD x 10.75 mm ID in these lengths - 12.70 (1/2"), 19.05 (3/4") or 25.4 (1 ")<br>13.00 mm OD x 11.00 mm ID in these lengths - 12.70 (1/2"), 19.05 (3/4") or 25.4 (1 ")<br>7.<br>They can be applied to your existing shaft.<br>How?  First, choose a size that is smaller than the OD of your shaft.  It is best to have your favorite cue repair person apply your new ferrule. Simply turn down your existing ferrule in a lathe to produce a tenon that is slightly smaller than the ID of your new Snapshot® Ferrule and about 1/16 inch longer.  Then thoroughly clean the ID of your New Snapshot® with alcohol or lacquer thinner.  Mix epoxy and thoroughly apply to both the inside of your new Snapshot® Ferrule and the outside of the tenon you just cut.  Apply the ferrule, allow to set and then work your shaft down with sandpaper to meet the OD of your new Snapshot® Ferrule.  IMPORTANT! You will work your shaft down to the Snapshot® Ferrule with sandpaper.  Don't sand too much.  DO NOT TRY TO TURN OR CUT YOUR SNAPSHOT® FERRULE IN A LATHE (You will break your tool or you will break your new ferrule).  Face off the extended tenon to your new ferrule being careful not to make contact with it.  Apply the tip of your choice and you are ready to play.  For the cue makers out there these