300W 220V Water Turbine Generator Kit Mini Hydroelectric Wheel Power Station

Description

Specification:
Length: 130mm
Width: 114 m
Power: 0-300 watts
Voltage: 220V
Wiring Method: three generator leads are connected to three ballast copper cores
Hookah Size: only pipe diameter between 20mm and 32mm
Features:
1. Water tube generators have different water pressure and power generation. The maximum power is 300 watts. Please check that your hydraulic performance meets the requirements.
2. Directly supply power to electrical appliances that can use 220V AC and consume less than 300W.
3. Main function: Charge the battery and electronic products through the charger,
(Note: The 220V alternating current generated by the hydroelectric device cannot be directly applied to the mobile phone and lithium battery products. For example, to charge the mobile phone, you need to connect the external wire of the hydroelectric generator to the socket and then insert it into the mobile phone for charging. to charge.)
Notes:
1. The maximum power generation is 300W, the actual power generation depends on your water pressure, and the water pressure depends on your water droplets.
2. The power of the generator depends on the drop height. The drop should be at least 10 meters or more. The higher the drop, the higher the water pressure and the higher the power. This is based on vertical gradients. Their lengths are not used as a reference. The key is to look at your vertical height.
3. Do not spray water on the generator head. The generator head should be kept free of water. If the generator sprays water, wrap the water spray area. The machine head should be kept dry, and it is strictly forbidden to spray water on the machine head.
Package Contents
1 Pc Hydro Engine