Espresso Machine Water Level Probe - 1/4" Fits most commercial espresso

Description

Espresso Machine Water Level Probe: Replace at least once a year.
Your espresso machine needs maintenance about 3 to 4 times a year.
Replacing the water level probe annually is critical. Over time these
probes build up with lime-scale causing the boiler water level to slowly
change. If neglected long enough the probe can "ground out" (from scale)
and never call for water to refill the boiler. Then the real problems start...
Water cooled heating elements need water! Don't let the boiler run dry
from a fouled water level probe. Thanks!
PLEASE NOTE:
This probe may need to be cut and or bent to match the probe removed. Very Important to match the probe removed!
Friendly Tip:
If your steam is too wet, then boiler water level is too high. If steam is too hot or powerful then water level is too low.
Friendly Tip 2:
Boiler pressure should run at 1.0 - 1.2 bar. I prefer 1.1 bar for ideal milk stretching/steaming.
Friendly
Tip 3:
Some machines have two level probes; a safety probe and a water level probe.
Final Tip:
Turn off machine, bleed steam pressure and let cool before servicing.
Features
1/4" MPTF Teflon & Brass Water Level Probe (17mm or 19mm wrench needed for removal)
Water level probe fits virtually every commercial, domestic,
and non-commercial espresso machine.
Excludes: Faema  and Rancilio's which are 3/8"
Benefits
Preventative
maintenance
will keep espresso machine working properly
Set boiler water level to just above half, approx.
We love that you love your coffee! So pl
ease feel free to take a 'C
affeinated'
walk through our eBay store.
·
New products added weekly
·We accept PayPal and credit cards via PayPal.
·Free shipping to all 50 States. International shipping available.
·Can't fix it? We'd love to help! Shoot us your espresso tech and coffee questions to see how we can assist you.
Shop happy and remember feedback benefits us both. Thanks!
8.75% Sales tax to CA buyers.