PLUS PULY CAFF N6 Soak Cleaning System kit

Description

WASHING SYSTEM PULY CAFF COMPLETE
This is a complete set for the cleaning and maintenance of you coffee equipment, all in one package.
NSF certified.
Instruction for use
Complete cleaning of the brewing filter, filter holder and back-flush valve unit:
a) place a rubber disk in the filter holder;
b) use the normal coffee filter with micro-holes and add 1 spoonful (about 10g or 1-2 tabs) of  PULY CAFF Plus NSF;
c) start brewing cycle and wait for at least 25/30 seconds and then drain off the water and rinse thoroughly until the water drained is clean.
Cleaning of the shower filter and back-flush valve unit only:
a) replace the filter with holes with the blind one provided;
b) add 1 spoonful (about 10g or 1-2 tabs) of  PULY CAFF Plus NSF;
c) start brewing cycle and wait for at least 25/30 seconds and then drain off the water and rinse thoroughly until the water drained is clean.
Manual cleaning of the brewing filters, filter holder and crockery: prepare a solution of 4 spoonfuls (about 40g or 4-8 tabs) of  PULY CAFF Plus NSF for every litre of very hot water, using plastic, stainless steel or glass containers; leave the items to soak completely for at least one hour (or overnight) and then rinse thoroughly
in running water.
PULY CAFF Plus NSF is fully effective in eliminating coffee, tea or milk stains and traces of lipstick from the cups and crockery, leaving them perfectly shiny and without any smell.