Tile Brazillian Cherry Mannington Commercial Vinyl Flooring WW107 1152 Sq Ft

Description

Mannington Commercial
Walkway Luxury Vinyl Plank
Brazilian Cherry
1152 Sq. Ft.
walkway
Performance Attributes
- Luxury vinyl plank/tile
- 4" x 36" plank with square edge profile
- Featuring a protective urethane wearlayer providing ease in maintenance significantly reducing the need for polish in low to normal traffic areas.
Polish may be required in areas adjacent to exterior doors or high traffic locations to extend the life of the floor.
- ASTM F-1700 – Class 3, Type B
Want to see more flooring?  Click the link below:
Visit My eBay Store: Stone Spectrum
Truck Load Pricing Available!
PHYSICAL CONSTRUCTION
Construction
Luxury Vinyl Plank / Tile (both with square edges)
Overall Thickness: .080 inches (2.0 mm)
Wearlayer Thickness: .012 inches - 12 mils (0.30 mm)
Static Load Limit: 750 psi
PLANK:
Size: 4" W x 36" L(101.6 mm x 914.4 mm)
Pieces Per Carton: 36
Coverage Per Piece: 1.00 Sq Ft. (0.09 m2)
Coverage Per Carton: 36 Sq. Ft. (3.34 m2)
Weight Per Piece: 0.8 lbs. (.35 kg)
Weight Per Carton: 28.5 lbs. (12.7 kg)
TILE
Size: 18" x 18" (457.2 mm x 457.2 mm)
Pieces Per Carton: 16
Coverage Per Piece: 2.25 Sq. Ft. (0.20 m2)
Coverage Per Carton: 36 Sq. Ft. (3.34 m2)
Weight Per Piece: 1.8 lbs. (.82 kg)
Weight Per Carton: 29.4 lbs. (13.13 kg)
ENVIRONMENTAL
3
rd
Party Certified Industry-wide Type III EPD
Floor Score Indoor Air Quality: – CDPH Standard Method v1.1-2010
ISO 14001 and 9001 Registered Manufacturing Facility
TESTING
Specification (ASTM 1700) Class 3, Type B – Embossed Surface
Heat Stability (ASTM F-1514)
Passes
Stain & Chemical Stability (ASTM F-925)
Passes
HUD/FHA Requirements Exceeds
Static Coefficient of Friction
Meets ADA Guidelines
Flooring Radiant Panel (ASTM-E-648)
.45 watts/cm², Passes (Class 1)
N.B.S. Smoke Chamber (ASTM-E-662) <450 – Passes
INSTALLATION
Installation Adhesive, Porous Sub-Floor V-82 / Full Spread*
Installation Adhesive, Porous and Non-porous Substrates V-88 /Transitional Pressure Sensitive/ Full Spread**
Installation Adhesive, Non-Porous Sub-floor V-95 /Full Spread*
Note: Must use V-95 Adhesive for heavy rolling loads.
Spray Adhesive
XpressStep** / XpressStep Premium***
•
Walkway is not recommended in commercial areas that require static dissipation.
•
Walkway is not recommended in commercial areas where the surface temperature over radiant heated substrate exceeds 85° F.
•
Dirt, wetness, and improper maintenance may cause significant variation in actual performance.
•
Specifications are based on averages from normal manufacturing tolerances. Such variations do not affect product performance.
•
This product is intended solely for use as an indoor floor covering and is not recommended or sold for any other purpose.
•
Use entryway systems outside each entrance to prevent dirt, sand, grit, and other substances from being tracked onto floor.
*Verify substrate (concrete) is dry per ASTM F-186
9 3 lbs. maximum MVTR or ASTM F-2170 75% maximum relative humidity.
**Verify substrate (concrete) is dry per ASTM F-18
69 8 lbs. maximum MVTR or ASTM F-2170 90% maximum relative humidity